Shamrock Automation, Inc.
Shamrock Automation, Inc.
About Us
Catalog
Photo Gallery
Product Manuals
Products
Safety
Services
Services

Shamrock offers two types of calibration services for our Tie-Bar Strain Gages.

Short Form Calibration

With this service the gage is dis-assembled and inspected upon receipt. The customer is notified of any repairs needed and upon approval the gage is repaired, calibrated, and returned to the customer. Click on the link above to view a sample report from the short form calibration procedure.

Long Form Calibration

With this procedure, the gage is immediately placed on the test stand and run through several pressure settings. The results are recorded and a determination is made concerning the accuracy of the gage as received. After these initial tests the gage is dis-assembled and inspected. The customer is notified of any additional repairs which would be required to bring the gage into complience. Upon approval the gage is repaired, calibrated, and again run through the initial tests using several pressure settings. The long form calibration report will also include the standard short form report. Click the link above to view a sample Long-Form Calibration Report.